General Mortise And Tenon Jig 1-1/2 In.

General Tools has grown to become the recognized industry leader for specialty hand tools and instruments. This trailblazing tool provides a quick and easy, all-in-1 solution to cut both a matching mortise and Tenon with a single inexpensive jig. The mortise and Tenon jig is ready to use right out-of-the-box to produce 1/4 inch mortise and Tenon joints for cabinets, furniture and frames. Included are the bushings for also producing 3/8 inch and 1/2 inch joints. Using a plunge router with the jig, woodworkers can cut fully aligned mortises and Tenons ranging from 1/4 inch to 1/2 inch W and from 1 inch to 3 inch long. The unit can be mounted directly on a workbench or onto a board that can be clamped in a vise or to a bench. The mortise and Tenon joint has been used for thousands of years, but not until now did someone figure out a way to provide a quick and easy, all-in-1 solution to cut both a matching mortise and Tenon with a single inexpensive jig. The unit can easily handle stock ranging from 1/2 inch to 1-1/2 inch T and can cut multiple mortises in a single long piece.

Accommodates stock from 1/2 in. to 1-1/2 in. T and any length

Mortise and Tenon thickness 1/4 in., 3/8 in. and 1/2 in.

1-quick change 1-3/16 in. guide sleeve and locking nut

1-1/4 inch guide bushing.

1-1/4 in. shank centering pin

1-flat spanner wrench for guide sleeve locking nut adjustment

All in-one solution to quickly cut matching, professional quality mortise and Tenon joints

Can cut multiple mortises in a single long piece